dmesg - AMD FX-8300 Eight-Core - AMD Radeon HD 4250 256MB -
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 (Ubuntu 3.13.0-24.46-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bfac8fff] usable
BIOS-e820: [mem 0x00000000bfac9000-0x00000000bfb17fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfb18000-0x00000000bfb1afff] reserved
BIOS-e820: [mem 0x00000000bfb1b000-0x00000000bfb1cfff] usable
BIOS-e820: [mem 0x00000000bfb1d000-0x00000000bfb23fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfb24000-0x00000000bfb4efff] reserved
BIOS-e820: [mem 0x00000000bfb4f000-0x00000000bfb55fff] ACPI NVS
BIOS-e820: [mem 0x00000000bfb56000-0x00000000bfb7cfff] reserved
BIOS-e820: [mem 0x00000000bfb7d000-0x00000000bfd7ffff] ACPI NVS
BIOS-e820: [mem 0x00000000bfd80000-0x00000000bfefffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./880GMH/U3S3, BIOS P1.80 12/27/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x82f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-DDFFF write-protect
DE000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BFF00000 mask FFFFFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000082f000000 aka 33520M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
total RAM covered: 3071M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3071MB, range: 1MB, type UC
e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x82ee00000-0x82effffff]
[mem 0x82ee00000-0x82effffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x82c000000-0x82edfffff]
[mem 0x82c000000-0x82edfffff] page 2M
init_memory_mapping: [mem 0x800000000-0x82bffffff]
[mem 0x800000000-0x82bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbfac8fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xbf9fffff] page 2M
[mem 0xbfa00000-0xbfac8fff] page 4k
init_memory_mapping: [mem 0xbfb1b000-0xbfb1cfff]
[mem 0xbfb1b000-0xbfb1cfff] page 4k
init_memory_mapping: [mem 0xbfd80000-0xbfefffff]
[mem 0xbfd80000-0xbfefffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x100001000-0x7ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x35b5c000-0x36da5fff]
ACPI: RSDP 00000000000f0450 000024 (v02 ALASKA)
ACPI: XSDT 00000000bfb1d070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bfb22568 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000bfb1d158 005410 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bfb50f80 000040
ACPI: APIC 00000000bfb22660 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000bfb226f8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 00000000bfb22738 00003A (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: MCFG 00000000bfb22778 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bfb227b8 000038 (v01 ALASKA A M I 01072009 AMI 00000004)
ACPI: SSDT 00000000bfb227f0 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082effffff]
Initmem setup node 0 [mem 0x00000000-0x82effffff]
NODE_DATA [mem 0x82eff7000-0x82effbfff]
[ffffea0000000000-ffffea0020bfffff] PMD -> [ffff88080ea00000-ffff88082e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x82effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0xbfac8fff]
node 0: [mem 0xbfb1b000-0xbfb1cfff]
node 0: [mem 0xbfd80000-0xbfefffff]
node 0: [mem 0x100001000-0x82effffff]
On node 0 totalpages: 8317925
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 12210 pages used for memmap
DMA32 zone: 781387 pages, LIFO batch:31
Normal zone: 117696 pages used for memmap
Normal zone: 7532543 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbfac9000-0xbfb17fff]
PM: Registered nosave memory: [mem 0xbfb18000-0xbfb1afff]
PM: Registered nosave memory: [mem 0xbfb1d000-0xbfb23fff]
PM: Registered nosave memory: [mem 0xbfb24000-0xbfb4efff]
PM: Registered nosave memory: [mem 0xbfb4f000-0xbfb55fff]
PM: Registered nosave memory: [mem 0xbfb56000-0xbfb7cfff]
PM: Registered nosave memory: [mem 0xbfb7d000-0xbfd7ffff]
PM: Registered nosave memory: [mem 0xbff00000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbff00000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88082ec00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8187934
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ b4000000 size 32 MB
Aperture pointing to e820 RAM. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ b4000000
PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
Memory: 32583612K/33271700K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 688088K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 133169152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3299.889 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6599.77 BogoMIPS (lpj=13199556)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 00bff00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8300 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (52798.22 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbfac9000-0xbfb17fff] (323584 bytes)
PM: Registering ACPI NVS region [mem 0xbfb1d000-0xbfb23fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbfb4f000-0xbfb55fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbfb7d000-0xbfd7ffff] (2109440 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 2:08:02, date: 10/01/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cefff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
pci 0000:00:01.0: [1849:9602] type 01 class 0x060400
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xff707000-0xff7073ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xff706000-0xff706fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xff705000-0xff705fff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xff704000-0xff7040ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xff703000-0xff703fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xff702000-0xff702fff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xff701000-0xff7010ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xff700000-0xff700fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:05.0: [1002:9715] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0xe000-0xe0ff]
pci 0000:01:05.0: reg 0x18: [mem 0xff200000-0xff20ffff]
pci 0000:01:05.0: reg 0x24: [mem 0xff100000-0xff1fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.1: [1002:970f] type 00 class 0x040300
pci 0000:01:05.1: reg 0x10: [mem 0xff210000-0xff213fff]
pci 0000:01:05.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xff100000-0xff2fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [1000:0079] type 00 class 0x010400
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x14: [mem 0xff680000-0xff683fff 64bit]
pci 0000:02:00.0: reg 0x1c: [mem 0xff640000-0xff67ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xff600000-0xff63ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
pci 0000:03:00.0: [11ab:4362] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xff520000-0xff523fff 64bit]
pci 0000:03:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:03:00.0: reg 0x30: [mem 0xff500000-0xff51ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xff500000-0xff5fffff]
pci 0000:04:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:04:00.0: reg 0x10: [io 0xb050-0xb057]
pci 0000:04:00.0: reg 0x14: [io 0xb040-0xb043]
pci 0000:04:00.0: reg 0x18: [io 0xb030-0xb037]
pci 0000:04:00.0: reg 0x1c: [io 0xb020-0xb023]
pci 0000:04:00.0: reg 0x20: [io 0xb000-0xb01f]
pci 0000:04:00.0: reg 0x24: [mem 0xff400000-0xff4001ff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:07.0: bridge window [mem 0xff400000-0xff4fffff]
pci 0000:05:00.0: [1969:1083] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xff300000-0xff33ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xa000-0xa07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xff300000-0xff3fffff]
pci 0000:00:14.4: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0xbfac9000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfb1d000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] could not be reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xff800000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xff100000-0xff2fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:06.0: bridge window [mem 0xff500000-0xff5fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:07.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:07.0: bridge window [mem 0xff400000-0xff4fffff]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0a.0: bridge window [mem 0xff300000-0xff3fffff]
pci 0000:00:14.4: PCI bridge to [bus 06]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xff100000-0xff2fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xff600000-0xff6fffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xff500000-0xff5fffff]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xff400000-0xff4fffff]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xff300000-0xff3fffff]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18728K (ffff880035b5c000 - ffff880036da6000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x00000000
microcode: CPU1: patch_level=0x00000000
microcode: CPU2: patch_level=0x00000000
microcode: CPU3: patch_level=0x00000000
microcode: CPU4: patch_level=0x00000000
microcode: CPU5: patch_level=0x00000000
microcode: CPU6: patch_level=0x00000000
microcode: CPU7: patch_level=0x00000000
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1443665283.548:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
pcieport 0000:00:07.0: irq 42 for MSI/MSI-X
pcieport 0000:00:0a.0: irq 43 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90013600000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xff704000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
tsc: Refined TSC clocksource calibration: 3299.998 MHz
ehci-pci 0000:00:13.2: irq 19, io mem 0xff701000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xff706000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xff705000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
Switched to clocksource tsc
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xff703000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xff702000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xff700000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:372:105
memory memory254: hash matches
rtc_cmos 00:05: setting system clock to 2015-10-01 02:08:07 UTC (1443665287)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[148]: starting version 204
sky2: driver version 1.30
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
megasas: 0x1000:0x0079:0x1000:0x9263: bus 2:slot 0:func 0
sky2 0000:03:00.0: Yukon-2 EC chip revision 1
sky2 0000:03:00.0: irq 44 for MSI/MSI-X
megasas: FW now in Ready state
megaraid_sas 0000:02:00.0: irq 45 for MSI/MSI-X
megaraid_sas 0000:02:00.0: [scsi0]: FW supports MSIX vector,Online CPUs: ,Current MSIX
sky2 0000:03:00.0 eth0: addr 00:30:4f:4e:61:4f
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m1024@0xff707000 port 0xff707100 irq 22
ata2: SATA max UDMA/133 abar m1024@0xff707000 port 0xff707180 irq 22
ata3: SATA max UDMA/133 abar m1024@0xff707000 port 0xff707200 irq 22
ata4: SATA max UDMA/133 abar m1024@0xff707000 port 0xff707280 irq 22
ahci 0000:04:00.0: irq 46 for MSI/MSI-X
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi5 : ahci
scsi6 : ahci
ata5: SATA max UDMA/133 abar m512@0xff400000 port 0xff400100 irq 46
ata6: SATA max UDMA/133 abar m512@0xff400000 port 0xff400180 irq 46
scsi7 : pata_atiixp
scsi8 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
megasas_init_mfi: fw_support_ieee=0
megasas: INIT adapter done
atl1c 0000:05:00.0: version 1.0.1.1-NAPI
megaraid_sas 0000:02:00.0: Controller type: MR,Memory size is: 512MB
scsi0 : LSI SAS based MegaRAID driver
scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M2 600 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA SanDisk SD6SB1M2 600 PQ: 0 ANSI: 5
scsi 0:0:4:0: Direct-Access ATA SanDisk SD6SB1M2 600 PQ: 0 ANSI: 5
scsi 0:0:7:0: Direct-Access ATA SanDisk SD6SB1M2 600 PQ: 0 ANSI: 5
scsi 0:2:0:0: Direct-Access LSI MR9261-8i 2.12 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 996089856 512-byte logical blocks: (509 GB/474 GiB)
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda:
sd 0:2:0:0: [sda] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-8: SanDisk SD6SB1M128G1022I, X231600, max UDMA/133
ata5.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA SanDisk SD6SB1M1 X231 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI disk
ata6: SATA link down (SStatus 0 SControl 300)
systemd-udevd[157]: renamed network interface eth0 to p6p1
systemd-udevd[153]: renamed network interface eth1 to p10p1
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 84 bits of entropy available
init: plymouth-upstart-bridge main process (230) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (240) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (244) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 7811068k swap on /dev/sdb1. Priority:-1 extents:1 across:7811068k SSFS
IPv6: ADDRCONF(NETDEV_UP): p6p1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): p10p1: link is not ready
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
systemd-udevd[359]: starting version 204
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
type=1400 audit(1443665290.938:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=429 comm="apparmor_parser"
type=1400 audit(1443665290.938:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=429 comm="apparmor_parser"
type=1400 audit(1443665290.938:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1443665290.938:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=429 comm="apparmor_parser"
type=1400 audit(1443665290.938:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1443665290.938:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
type=1400 audit(1443665290.942:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=432 comm="apparmor_parser"
type=1400 audit(1443665290.942:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"
type=1400 audit(1443665290.942:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=432 comm="apparmor_parser"
type=1400 audit(1443665290.942:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=432 comm="apparmor_parser"
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
hda-intel 0000:01:05.1: Using LPIB position fix
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
hda-intel 0000:01:05.1: Enable sync_write for stable communication
[drm] radeon kernel modesetting enabled.
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:05.1/sound/card0/input5
checking generic (d0000000 130000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1849:0x9715).
[drm] register mmio base: 0xFF200000
[drm] register mmio size: 65536
ATOM BIOS: B43106
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 16335604 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880800f9ec00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880800f9ec0c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
atl1c 0000:05:00.0: irq 47 for MSI/MSI-X
atl1c 0000:05:00.0: atl1c: p10p1 NIC Link is Up
[drm] ring test on 0 succeeded in 1 usecs
random: nonblocking pool is initialized
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
HDMI ATI/AMD: no speaker allocation for ELD
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
radeon 0000:01:05.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
init: udev-fallback-graphics main process (630) terminated with status 1
HDMI ATI/AMD: no speaker allocation for ELD
init: plymouth-upstart-bridge main process ended, respawning
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
HDMI ATI/AMD: no speaker allocation for ELD
audit_printk_skb: 27 callbacks suppressed
type=1400 audit(1443665411.466:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1113 comm="apparmor_parser"
type=1400 audit(1443665411.466:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1113 comm="apparmor_parser"
type=1400 audit(1443665411.466:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1113 comm="apparmor_parser"
type=1400 audit(1443665411.466:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1113 comm="apparmor_parser"
type=1400 audit(1443665411.466:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1113 comm="apparmor_parser"
type=1400 audit(1443665411.466:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1113 comm="apparmor_parser"
type=1400 audit(1443665411.466:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=1115 comm="apparmor_parser"
init: plymouth-stop pre-start process (1200) terminated with status 1
ip_tables: (C) 2000-2006 Netfilter Core Team
type=1400 audit(1445240048.065:28): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=5579 comm="apparmor_parser"
atl1c 0000:05:00.0: atl1c: p10p1 NIC Link is Down
atl1c 0000:05:00.0: atl1c: p10p1 NIC Link is Up
atl1c 0000:05:00.0: atl1c: p10p1 NIC Link is Down
atl1c 0000:05:00.0: atl1c: p10p1 NIC Link is Up
init: upstart-udev-bridge main process (351) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (1007) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (1014) terminated with status 1
init: upstart-socket-bridge main process ended, respawning